woodworking music box | Make a lighted shadowbox

woodworking music box

If you have seen the last couple of Mere Minutes, you will know that I made a version of this shadowbox many years ago. I consider that one a prototype, because there is a lot that I was never happy with.
I spent a lot of time wiring and soldering, trying to get a little light bulb to shine into the box. It never really worked well: it wasnt very bright and seemed to just drain the 9 volt battery. Thankfully, today we have LEDs, which are brighter and last much longer. Not only that, they are cheap.
I used a "Stick n Click" puck light for my new shadowbox. Cost $4.00. It uses three AAA batteries that will last for 1000 hours.
Dont waste good wood by building with it.I made my original box with solid purpleheart lumber for the entire project. This was a waste of good wood. Many projects have a large percentage of secondary surfaces: structural components and other areas that arent visible. Aint nothin wrong with using poplar or plywood on anything that wont show. And if its something to be painted, MDF is outstanding. Its easy to cut and sand, it glues well, and paint flows on beautifully.
So this time, I used MDF for nearly the entire shadowbox. But its the small bit of zebrawood that steals the show. I used just a two foot length, but resawing gave me six feet.
I also decided to improve this model by adding a mirror. In fact, once again I built the project around stuff Tim Sluder sent me. Along with the Shaker pegs, he sent four mirrors. I still have three left for more projects. Thanks again,Tim!


Do you find information about woodworking music box are you looking for? If not, below may help you find more information about the woodworking music box. Thank you for visiting, have a nice day.