woodworking beginner box | So I built another box

woodworking beginner box

  If we are being honest nearly everything we build in our woodworking shop is a box, unless you are Izzy Swan, then you build a t-rex. I set out to make this particular box to fill a small organizational need in our kitchen/dining room.

 As I was making this project I encountered a few things that I wanted to share with my reading public.

  I decided to use the sides from this wine bottle box and my Bessey Duo Clamp did a very good job of pushing the sides apart without cracking the wood.

  When I got to the assembly stage there are Bessey clamps again. This box has no metal fasteners, just Weldbond glue and sufficient clamping time.

  The ends of my box are aromatic cedar, I love the colour and the grain of this wood. An FYI it can be very brittle. Initially I was going to cut the dados by hand but the wood was breaking out uncontrollably when I used my chisel to make a 1/4 inch dado. The better option was to use my sliding mitre saw for this cut.  

  I cut my left index finger working on my table saw a couple of seasons ago and resolved (and promised my wife) that I would leave the guard on the table saw and use other tools when the guard got in the way.  I have only taken the guard off my saw twice to use my stacked dado set, I get along fine with my router table, mitre saw and other tools 99% of the time.

  Part of the reason I wanted to make the box was to try my Red Neck Polissior. Cedar looks great with a wax finish.

There it is, ugly,wrapped in Duct tape 

and ready to use.

  Well, it didnt get used because I found a source of quality broom corn and my wife had an inspiration to replace the hose clamps holding the broom corn.

 The clamps are replaced my zip ties. The ties are spread out to fit between my fingers and all the lumps are on one side. 

 The end result is a box to go on the island between our kitchen and dining room to hold all the stray papers and magazines that collect there.

  The cedar polished up great with the polissoir and bees wax. I will continue to experiment with this finishing method but so far I like the result and zero drying time.

 cheers, ianw

Do you find information about woodworking beginner box are you looking for? If not, below may help you find more information about the woodworking beginner box. Thank you for visiting, have a nice day.